Tips for using Your car magnet
Home - Tips for using Your car magnet
Before placing the car magnet
Make sure the car-body and the back of the car magnet is clean! Clean any impurities from both surfaces with a wet rug and then dry them.
Placing the car magnet
Suit one side of the magnet then continue with rolling the magnetic sheet.
Take care that edge of the rolling direction adheres on its full length to the car-body.
Other useful informations
Under +5 °C do not fold your car magnet because its material could become stiff and would break.
If for a longer or shorter period you do not use the car magnet, keep it stretched at room temperature, in order to protect it. Do not put anything on top of it!
Both sides of the car magnet can be cleaned with a soft sponge or rug and water with detergents.
Cleaning with any chemicals is forbidden!
In case of sliding the car magnet motes gathered under it can hurt the waxing of the car and also the back of the car magnet. Therefore this type of move is not advised!
It has to be taken into consideration that the adhesive strength of the car magnet may be decreased on re-polished or waxed body surfaces.
If you keep the above mentioned advices, you will be able to use your car magnet safely up to the speed of 160 km/h.
If you have any questions or suggestions, do not hesitate to contact us.